Chawlettu hna sin in biahalnak tawlrel awkah a ttha ngaimi phu kan ngei. Kan tinhmi cu “kan thilri tthatnak, man le kan riantuantu hna riantuannak in 100% riantuanpi lungtlinnak” le cawtu hna karlak ah a ttha ngaimi riantuannak ah lawmhnak a si. Sehzung tampi he, Tuluk ram phunphun fawi tein kan langhter khawh Thilri dawhnak kuang Thermoforming Machine Sertu hna, Kan thilri le kan tawlrelnak kong ah na lung a thawh ahcun kanmah he pehtlaihnak tuah awkah na hngah awk a si lo. Kan thilri nih lungtlinnak an pek lai ti kha fek tein kan zumh.
Chawlettu hna sin in biahalnak tawlrel awkah a ttha ngaimi phu kan ngei. Kan tinhmi cu “kan thilri tthatnak, man le kan riantuantu hna riantuannak in 100% riantuanpi lungtlinnak” le cawtu hna karlak ah a ttha ngaimi riantuannak ah lawmhnak a si. Sehzung tampi he, fawi tein a phunphun kan langhter khawh Tuluk Thermoforming Machine Sertu hna, Thilri dawhnak kuang Thermoforming Machine, Voikhat hman khawhmi rawl chiahnak kuang sernak seh, Kan riantuantu hna cu hmuhtonnak an ngei i fek tein cawnpiakmi an si, thiamsang hngalhnak an ngei, thazaang an ngei i an riantuanpi hawi hna kha No. 1 ah an upat zungzal hna, cun riantuanpi hawi hna caah ttha tein le pumpak riantuannak pek khawhnak ding caah an si khawh chungin tuah dingin bia an kamh hna. Company nih cun a cawtu hna he caan saupi riantuan ttinak pehtlaihnak kilven le tthanchoter kha a biapi ah a chiah. Na hawikom ttha bik kan si bantukin, hmailei a ttha mi kan sersiam lai i nangmah he hmunkhat ah lungtlinnak a pemi theipar kan i nuamh lai, a hmunmi thazaang, a dong lomi thazaang le hmailei lungput he kan i lawm lai tiah bia kan kamh.
Thilri Hramthawknak
Plastic Thermoforming Machine nganpi cu hmun li a si A bik in a phunphun chuahnak caah plastic bawm ( ar chiahnak kuang, thei chiahnak kuang, rawl chiahnak kuang, thilri chiahnak kuang, tbk) thermoplastic catlap he, cu bantuk PS, PET, HIPS, PP, PLA tbk.
Hmaichung um thil
1.Mechanical, thli le electric fonhmi, riantuannak vialte cu PLC nih a uk. Touch screen nih riantuannak kha a fawiter i a fawiter.
2. Pressure le/asiloah vacuum sernak.
3. A cunglei le a tanglei mold sernak.
4. Servo motor rawl peknak, rawl peknak saunak cu step-less in remh khawh a si. A rang tukmi le a dikmi.
5. A cunglei le a tanglei lumternak, tthen li lumternak.
6. A ttha ngaimi, aa khatmi lumnak a ngeimi fimthiamnak in lumnak uknak system he lumternak nih a tuah lai lo
lenglei voltage nih a thlen khawh. Thazaang hmannak tlawm (thazaang khonnak 15%) nih, lumternak meikhu chuahnak caan sau deuh a hman khawhnak hnga a bawmh.
7. Servo motor nih a ukmi sernak, tannak le tuknak hna cu thilri hna nih amah tein an rel.
8. Thilri pawl cu a tanglei lei ah chiah an si lai.
9. Data hngalh khawhnak riantuannak.
10.Rawl peknak kauhnak cu aa khat tein asiloah mah tein electric lam in remh khawh a si.
Cauk a dih tikah lumternak cu amah tein a chuak lai.
12.Amah tein catlap phorh, riantuannak phorh kha zorter.
A biapimi fianternak
| Zohchunhmi | HEY02-6040 | HEY02-7860 |
| A tam bik sernak hmun (mm2) | 600×400 | 780×600 |
| Riantuannak hmun | Ser, tuk, tan, chiah | |
| Hman khawhmi thilri | PS, PET, HIPS, PP, PLA, tbk | |
| Cazual kauhnak (mm) | 350-810 | |
| Cazual a thuhnak (mm) | 0.2-1.5 | |
| Max. Dia. Sheet Roll (mm) | 800 | |
| Forming Mold Stroke(mm) | 120 cu cunglei le tanglei caah | |
| Thazaang hmannak | 60-70KW/H | |
| Max. Sermi thuknak (mm) | 100 | |
| Cutting Mold Stroke(mm) | 120 cu cunglei le tanglei caah | |
| Max. Thlehnak hmun (mm2) | 600×400 | 780×600 |
| Max. Mold kharnak thazaang (T) | 50 | |
| A rangnak (cycle/min) | A tam bik 30 | |
| Max. Vacuum Pump tthawnnak | 200 m3/h | |
| Khuasik System | Ti lumternak | |
| Thazaang Peknak | 380V 50Hz 3 phase 4 wire | |
| Max. Lungthawhnak Thazaang (kw) | 140 | |
| Max. Seh dihlak thazaang (kw) | 170 | |
| Sehzung kauhning (mm) | 11000*2200*2690 | |
| Cazual phurtu kauhning (mm) | 2100*1800*1550 | |
| Seh dihlak rit (T) | 15 | |
A biapi bikmi thilri phun
| PLC | DELTA |
| Touch Screen | MCGS |
| Servo Motor | DELTA |
| Aa tluk lomi motor | CHEEMING |
| Frequency thlennak | DELIXI |
| Transducer | OMDHON |
| Lungvar lumternak | TRIMBLE |
| AC pehtlaihnak | CHNT |
| Thermo Relay | CHNT |
| A karlak Relay | CHNT |
| A fekmi Relay | CHNT |
| Solenoid Valve | AirTAC |
| Thli thlennak | CHNT |
| Vanlawng Cylinder | AirTAC |
| Hnawmhnak Uknak Valve | AirTAC |
China Thilri dawhnak kuang Thermoforming Machine Sertu hna. “Lungtak tein um, thilthar sernak, fek tein tuah khawhnak le riantuan khawhnak” cu kan company nih caan saupi tiang a cawtu hna he hmunkhat ah dirh khawhnak ding caah a hmunmi ruahnak a si lai.
Tuluk thermoforming seh sertu hna, thilthuam chiahnak kuang thermoforming seh, voikhat hman khawhmi rawl chiahnak seh sernak seh, Kan company cu hi bantuk thilri ah ramkip in a kan petu a si. A ttha ngaimi thilri thimnak khuaruahhar kan langhter.
Na cakuat kha kan sinah kuat:
Recommended Thilri
Tam deuh +-
Model: HEY01PLC Pressure Thermoforming Machine With Three Stations HEY01
PLC Pressure Thermoforming Machine With Three Stations HEY01 Product Introduction Hi Pressure Thermoforming Machine A bik in plastic thilri phunphun (ar chiahnak kuang, theipar chiahnak) sernak caah a si. -
Model: HEY03Single Station Automatic Thermoforming seh HEY03
Thilri Hramthawknak Single Station Automatic Thermoforming Machine A bik in plastic thilri phunphun (ar chiahnak kuang, thei chiahnak kuang, rawl chiahnak kuang, thilri chiahnak kuang, tbk.) sernak caah a si. -
Zohchunhmi:Plastic hrai lumternak seh
Cup Thermoforming Machine Hmannak Plastic Cup Thermoforming Machine dihlak A bik in plastic bawm phunphun (jelly hrai, dinmi hrai, voikhat hman khawhmi hrai, thilri chiahnak kuang) sernak caah a si. -
Model: HEY06Station Pathum Negative Pressure Sernak Seh HEY06
Three Stations Negative Pressure Forming Machine HEY06 Application Hi Thermoforming Machine A bik in plastic thilri phunphun sernak caah a si (ar chiahnak kuang, thei chiahnak kuang, bawm ...